Honda Logo MOT Check
MOT pass rates, common failures, and reliability data for the Honda Logo. Check any Logo by registration number below.
Free, instant, no sign-up required.
82.1%
Avg Pass Rate
-6.1%
vs Honda Avg
4
Year Ranges
Good
Reliability
Honda Logo — MOT Reliability Overview
The Honda Logo has an average MOT pass rate of 82.1%, which is 6.1 percentage points below the Honda brand average of 88.3%. This is a strong result, indicating that the Logo is well-engineered and tends to age well mechanically. Owners can expect fewer surprises at MOT time.
The most common reasons a Honda Logo fails its MOT are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements, headlamp reflector or lens seriously defective or missing. If you are preparing your Logo for its MOT, checking these areas first could save you a retest fee. Our detailed fault analysis includes estimated repair costs for each failure type.
Before buying a used Honda Logo, we recommend checking the full MOT history, write-off status, outstanding finance, and stolen vehicle status. These checks can be done for free using the registration number.
MOT Pass Rate by Year
How the Honda Logo performs at MOT across different model years.
2001
Based on 62 vehicles
2000
Based on 880 vehicles
4.6%
19.8%
1999
Based on 218 vehicles
108k mi
0
Based on 518 vehicles
81k mi
Top MOT Failures — Honda Logo
The most common reasons a Honda Logo fails its MOT, aggregated across all year ranges.
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
The aim of a headlamp is not within limits laid down in the requirements
Headlamp reflector or lens seriously defective or missing
Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired
Other Honda Models
Compare MOT reliability across Honda models.
Honda Logo — Frequently Asked Questions
Common questions about the Honda Logo MOT and reliability.
What is the MOT pass rate for the Honda Logo?
What are the most common MOT failures on a Honda Logo?
Is the Honda Logo reliable?
How do I check the MOT history of a Honda Logo?
What mileage should I expect on a Honda Logo?
Check Your Honda Logo's MOT History
Enter the registration number for the full MOT history — free and instant.